Comfort Height Toilet Installation for a Customer in Erdington
Recently, our bathroom installers completed the installation of a comfort height toilet for a customer in Erdington, Birmingham. The lady had been finding it difficult to stand up from her existing standard-height toilet because it was positioned too low. After discussing the options, we recommended upgrading to a comfort height model to improve accessibility and daily comfort.
The toilet was supplied by Bells Plumbing Supplies in Kings Norton:
https://www.bellplumbing.co.uk/
Our team removed the old unit and installed the new comfort height version, ensuring all pipework and fixings were aligned correctly and the cistern operated smoothly. The higher pan height now allows her to sit and stand without strain and gives additional independence in her own home.
If you need reliable plumbers in Birmingham, visit:
https://afterglowheating.co.uk/
What Is a Comfort Height Toilet?
A comfort height toilet is built slightly taller than a standard toilet, usually around 450–480mm from the floor to the seat. This added height can make the act of sitting and standing far easier, especially for:
• older adults
• people with limited mobility
• tall individuals
• those recovering from injuries
• users with knee or back pain
The height reduces pressure on the hips and knees and provides a more natural standing transition.
Why Customers Choose Comfort Height Toilets
There are several reasons customers prefer comfort height toilets:
• easier to sit and stand
• reduced risk of falls
• improved independence for older users
• better comfort for taller individuals
• more ergonomic bathroom layout
In this Erdington installation, the primary reason was mobility difficulty. The customer was struggling to rise from the lower standard model, and the change has already made a noticeable difference.
Our Installation Process
When fitting a comfort height toilet, our bathroom installers follow a detailed process:
- isolate and drain the existing toilet
- remove the old pan and cistern
- check and prepare waste and supply connections
- position and secure the new comfort height pan
- connect cistern mechanisms and flush test
- silicone seal around the base for hygiene and stability
Installing a comfort height model is straightforward for professional plumbers and can usually be completed in a single visit.
Frequently Asked Questions About Comfort Height Toilets
Are comfort height toilets more expensive?
They are often slightly more expensive than standard toilets, but not significantly. Many homeowners consider the improved comfort well worth the upgrade.
Are comfort height toilets only for elderly people?
No. Many customers simply prefer them for increased comfort or reduced strain on joints.
Can you fit a comfort height toilet into any bathroom?
In most cases, yes. They fit in the same space as a standard toilet.
Do comfort height toilets flush differently?
No. The flushing system works the same, and most modern comfort toilets use water-saving flush valves.
How long does installation take?
Typically around two to three hours, depending on existing pipework and condition of the old toilet.
Can I replace my current toilet with a comfort height version?
Yes. Most bathrooms can be upgraded with minimal changes.
Need a Comfort Height Toilet Installed?
If you or a family member are finding it difficult to use a standard toilet, upgrading to a comfort height model may help.
To speak to qualified and experienced plumbers in Birmingham with a follow link:
https://afterglowheating.co.uk/
Our team provides full bathroom installation services and can supply and fit a range of accessibility-focused fittings.
